FAQs
These flags are used to identify the locations of important infrastructure like water, electric and sewer lines. They are for your safety and for the crews, so please do not move them.
What do red flags mean in my yard? ›
Here's a key to the flags' colors: RED – Electric Power Lines, Cables, Conduit and Lighting Cables. YELLOW – Gas, Oil, Steam Petroleum or Gaseous Materials. ORANGE – Communication, Cable TV, Alarm or Signal Lines, Cables or Conduit. BLUE – Water, Irrigation and Slurry Lines.
What are the orange flags in my yard? ›
Yellow - Gas Lines. Red - Electric Lines. Orange - Communication lines (think your internet, phone, or television) Blue – Potable Water lines.
What does att clr mean? ›
This is known as the Carrier of Last Resort (COLR) obligation, which ensures that everyone in California has access to safe, reliable, and affordable telephone service.
How long should you leave utility flags in your yard? ›
The paint will fade over time; the people responsible for the planned project should remove the flags when they are no longer needed. That could be as long as 14 weeks. The flags and paint marks may be an annoyance, but they are crucial for the safety of construction workers and others near a work site.
What does the flag on a property mean? ›
Here is what each color means. White markers are areas of proposed excavation, generally found at construction sites. Pink markings are temporary survey markings. Red flags indicate electric power lines, cables, conduit and lighting cables. Yellow marks areas of natural gas, oil, steam, petroleum or gaseous materials.
What color flags are used to mark utilities? ›
When a utility company marks a location, they are advised to include a color code that consists of White, Pink, Blue, Green, Yellow, Orange, Red, and Purple color markings of both flags and spray paint to represent what each of lines located represent.
Should I be worried about a red flag warning? ›
A Red Flag Warning means warm temperatures, very low humidities, and stronger winds are expected to combine to produce an increased risk of fire danger. -If you are allowed to burn in your area, all burn barrels must be covered with a weighted metal cover, with holes no larger than 3/4 of an inch.
Do red flags mean good or bad? ›
Red flags are warning signs that indicate unhealthy or manipulative behavior. They are not always recognizable at first — which is part of what makes them so dangerous. However, they tend to grow bigger and become more problematic over time.
What does blue spray paint on grass mean? ›
BLUE: Potable, Water. GREEN: Sewers and Drain Lines. PURPLE: Reclaimed Water, Irrigation and Slurry Lines. PINK: Temporary Survey Markings.
The pink represents attraction toward the same sex, and the royal blue stands for attraction toward the opposite sex. The purple band symbolizes attraction to all genders. Lesbian Flag. The most commonly used Lesbian flag, the new lesbian flag(s), was created in 2018 by Tumblr blogger Emily Gwen.
What do the different color flags mean? ›
General Flag Color Meanings
Red: Signifies war, vibrancy, revolution, and power. It can also stand for domination, courage, and in some instances, danger alertness. Blue: Good fortune, alertness, liberation, and determination. Green: Fertility, prosperity, and agricultural abundance. Yellow: Wealth (gold) and energy.
What does DT mean on ATT? ›
“nw” is nights and weekends and “dt” is daytime, I would imagine. There are still some people grandfathered in to those old plans where that mattered.
What are the white spray paint markings on pavement? ›
White – Proposed excavation areas or routes that show where digging is proposed.
How do I get rid of AT&T ActiveArmor? ›
Use myAT&T or your app store to downgrade from ActiveArmor advanced and remove the subscription from your account.
- Open AT&T ActiveArmor mobile security and go to Settings.
- Tap Account. ...
- Select Free.
- Follow the prompts.
- Cancel your subscription through your device app store or your myAT&T account.
Can I remove utility flags in my yard in Texas? ›
If you see flags and paint in your yard, please do not remove them. There is work being performed on a utility line without you being aware. These markings are very important and needed by the contractors to know what is underground.
What do small white flags in a yard mean? ›
A white utility flag means pre-marking of the outer limits of the proposed excavation or marking the centerline and width of proposed lineal installations of buried facilities.(proposed excavation limits or route)
Can I remove utility flags in my yard in Michigan? ›
Leave the flags in place until your underground work is complete. You must begin digging within 14 days of the start date listed on the ticket. Make sure children and neighbors know not to remove the flags until the work is done.
Can I remove utility flags in my yard in Florida? ›
Work being performed by contractors is almost always in the right-of-way, or within an existing utility easem*nt. Residents shouldn't mow over, or remove the flags, especially if they value their water, sewer, gas, internet, phone, or other services.